VINCENT CD-S5 Spécifications télécharger pdf (Page 33)

Vincent

CONNECTION TO AMPLIFIER,

RECEIVER OR PREAMPLIFIER

The CD-S5 has two analogue signal outputs and

two digital output connections on the back of the

device. The signal from the integrated D/A conver-

ter can be input to a traditional analogue audio

component (amplifier) via the analogue outputs

(10). On the digital outputs (11) there is a digital

output audio signal which can be processed by

external D/A converters or digital processors.

CD-S5

Amplifier, Receiver

LINE IN

Use of the analogue output with XLR connector

This is where the stereo audio signal converted to analogue by the high quality integrated D/A converter

and amplified by the Class A stage is output symmetrically. Two XLR cables are required for connection

to an amplifier. Connect the XLR connectors “L” and “R” in the field “ANALOG OUTPUT XLR” (10) with

the left and right connectors of the XLR amplifier input which is usually labelled “CD,” “XLR IN,” “BALAN-

CED IN” or “FRONT R/L”.

CD-S5

Amplifier, Receiver

BALANCED IN

Use of the analogue output with RCA connectors

This is where the stereo audio signal converted to analogue by the high quality integrated D/A converter

and amplified by the Class A stage is output. A RCA cable is required for connection to an amplifier.

Connect the RCA connectors “L” and “R” in the field “ANALOG OUTPUT RCA” (10) with the left and right

audio connectiors of the amplifier input (standard high level input) which is usually labelled “CD,” “LINE

IN” or “FRONT R/L”.

Only one of the four outputs needs to be connec-

ted to play CDs. Select the appropriate connection

between the CD player and your amplifier, pream-

plifier, receiver or converter. Bear in mind when

doing this that the special sound qualities of the

player's Class A output amplifier stage will only be

exploited if one of the analogue outputs (10) is

used to output the music signal.

RCA Connection

XLR Connection

Check that the electricity supply to your home is appropriate to the device. The required voltage and frequency

can be read on the back of the device beside the socket for the mains. If the electricity supply is appropriate,

push the inlet connector of the supplied mains cable firmly into socket for the mains on the back of the device

(12). Connect the other end of the mains cable to a mains socket.

CONNECTION OF THE POWER CABLE

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 63 64

Commentaires sur ces manuels

Pas de commentaire

VINCENT CD-S5 Spécifications Page 33

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de CD VINCENT CD-S5