VINCENT CD-S5 Spécifications télécharger pdf (Page 42)

42

Vincent

TECHNICAL SPECIFICATIONS

D/A converter: 24 bit / 192 kHz

Frequency response: 10 Hz - 20 kHz (±0.5dB)

Total Harmonic Distortion: < 0.003 %

Signal to Noise Ratio: > 95 dB

Dynamic Range: > 100 dB

Output impedance: 600Ω

Audio Output Voltage: 2.5 V

Channel Separation: > 90 dB

Outputs: 1x XLR stereo, 1x RCA stereo,

1x digital coaxial, 1x digital optical

AC power connection type: 220V – 240V / 50 Hz max. 25W

Dimensions (WxHxD): 430 x 135 x 330 mm

Weight: 10 kg

Colour: black / silver

SEARCH FOR ERRORS

Symptom Possible Cause Countermeasure

No audio playback

on one channel

One of the signal cables between CD player

and amplifier input has not yet been plugged

in or is defective.

One of the loudspeaker cables or (if you are

using pre & main amplifiers) one of the signal

cables between pre and main amplifier is not

correctly connected or is faulty.

Check the cable connections, tighten them if

necessary.

Check all the connections of the amplifiers

and whether the loudspeakers are working.

Poor sound quality

Analogue audio outputs of the CD player are

connected to phono inputs of the

amplifier/receiver/preamplifier.

The cable connections are not tight, the con-

nectors are dirty or a cable is defective.

Use a normal high level input (“CD” or “LINE

IN”) on these devices.

Check the cables and cable connections.

The remote control

cannot perform

any functions

No batteries inserted in the remote control,

batteries are not inserted correctly or are

depleted.

The line-of-sight between the remote control

and the unit is obstructed, the range was

exceeded or the hand unit was operated from

a position too far to one side.

The unit is not switched on.

Check and replace the batteries if necessary.

Try to point the remote control at the front of

the unit only when the sight-line is clear,

within a 7-metre distance and, if possible,

facing the unit.

Switch on the unit.

Humming low

frequency noise is

audible, even as

no audio source is

playing back

See section "Net frequency noise" in the

chapter "Tips".

See section "Net frequency noise" in the

chapter "Tips".

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 63 64

Commentaires sur ces manuels

Pas de commentaire