VINCENT CD-S2 Spécifications télécharger pdf (Page 33)

Vincent

CONNECTION TO AMPLIFIER,

RECEIVER OR PREAMPLIFIER

The CD-S2 has two analogue signal outputs and

one digital output connection on the back of the

device. The signal from the integrated D/A conver-

ter can be input to a traditional analogue audio

component (amplifier) via the analogue outputs

(13). On the digital output (14) there is a digital

CD-S2

Amplifier or receiver

LINE IN

Use of the digital output

This output emits the music signal as a digital S/PDIF audio signal (PCM). The connection is only requi-

red if an external D/A converter is to be used or the player is to be connected to the coaxial digital audio

input of an AV receiver or an AV preamplifier. To make the connection you need a coaxial cable with 75Ω

characteristic wave impedance and with a RCA connector on both sides, which is not supplied with the

device. Connect the connector “DIGITAL OUT COAXIAL” (14) of the device to the digital input socket of

the amplifier which is usually labelled “DIGITAL IN” or “COAXIAL INPUT”. The best sound is obtained in

most cases by connection with an analogue output (13).

CD-S2

AV preamplifier,

AV receiver, converter

DIGITAL IN

Use of one of the analogue outputs with RCA connectors

This is where the stereo audio signal converted to analogue by the high quality integrated D/A converter

is output. One of the two outputs and an RCA cable is required for connection to an amplifier. Connect

one pair of RCA connectors (“L” and “R”) in the field “AUDIO OUTPUTS” (13) with the left and right audio

connectors of the amplifier input (standard line level input) which is usually labelled “CD,” “LINE IN” or

“FRONT R/L”. If you want, you can use both outputs at the same time.

output audio signal which can be processed by

external D/A converters or digital processors.

Only one of the three outputs needs to be connec-

ted to play CDs. Select the appropriate connection

between the CD player and your amplifier, pream-

plifier, receiver or converter.

RCA connection

Coaxial Cable

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 63 64

Pas de commentaire

VINCENT CD-S2 Spécifications Page 33